Power
Doorlock Relays:
Part Number: |
| 420 |
Reversing Relay. |
| 421 |
With Wiring Harness, 1 Switch, and 1 Actuator. |
| 422 |
1 Switch, and 2 Actuators. |
| 423 |
2 Switches, and 2 Actuators. |
Door Jamb Switches:
Part Number:
|
| 425 |
One wire, contact closes to ground when door is open. |
| 426 |
Two wire, contact closes to ground when foor is open. |
Lighting (Interior
& Exterior):
Part Number: |
| 430 |
Courtesy light system, two light assemblies bulbs not
included. Wire and terminals. |
| 435 |
Front running and signal light wiring, (no headlamp)
18 Feet of wire. |
| 436 |
Rear running, signal and stop light wiring (includes
3rd brake light wiring) (no reverse) 24 feet of wire. |
Misc Packages:
Part Number: |
| 440 |
Neutral safety switch wiring (Column) can be used with
other neutral safety switches. |
| 441 |
Reverse lighting switch/wiring GM OEM connector and
wire to column switch |
| 442 |
Reverse lighting switch/wiring GM OEM connector and
wire to reverse lights |
| 400 |
GM altenator wiring 2pin with wire for internal regulated
altenators, wiring terminals and fusible link. |
| 401 |
GM altenator wiring one wire internaly regulated altenators,
wiring terminals and fusible link. |
| 405 |
Distributor ignition wiring GM HEI ignition. |
| 406 |
Distributor ignition wiring for coil ignition requiring
a ballast resistor, and terminals. |
| 410 |
GM steering column signal/emergency lighting Interfaces
to GM columns 1969 to present wired directly to CDP12 and includes
horn wire. |
| 411 |
GM steering column signal/emergency lighting Interfaces
to some pre 1969 GM columns wired directly to CDP12 and includes horn
wire. (Pyramid) |
| 412 |
GM steering column signal/emergency lighting Interfaces
to some pre 1969 GM columns wired directly to CDP12 and includes horn
wire. (Rectangle) |
| 413 |
GM steering column signal/emergency lighting connector.
OEM wiring not available a replacement wire harness is manufactured.
Column is removed and new connector is installed. Make sure column
wire is of sufficent length for the conversion (1/4 moon) |
| 413 Upgrade |
Upgrade wiring harness for 413 |
| 415 |
Electric fan/fuel pump relay required when the switch
cannot carry the load. |
| 455 |
Complete Instrument cluster wiring harness (contact
for more info) |
| |